Wednesday, December 15, 2010
Para USA, PXT Super Hawg Pistol
Specifications:
Caliber: .45 ACP
Rounds: 8+1
Barrel: 6-inch
Weight: 40 ounces
Length: 9.5-inch
Height: 5.75-inch
Hammer: Spurred
Sights: Adjustable / Fiber-Optic
Receiver: Stainless
Finish: Stainless
Feature Overview: Super long 6-inch integral-ramp, match-grade barrel and an all-weather stainless finish, the Super Hawg is a bullseye shooter's dream, at a price that can't be beat. Front strap is checkered 30 lines per inch, and it has double-diamond checkered cocobolo stocks.
Friday, November 5, 2010
Star Z-84 (Spain)
Star Z-84Z-84 submachine gun has been developed in mid-1980s by Star Bonifacio Echeverria SA company of Spain, as a compact, lightweight yet comfortable and powerful weapon. Unlike its predescessors, the Z-62 and Z-70B, Z-84 available only in 9mm Luger/Parabellum (some sources said that it can be orederd in 9mm Largo, however) and is adopted by some Spanish Army and police units, and also is sold for export.
Z-84 is built to modern standards, having stamped steel, two-piece receiver, with magazine housing built into the pistol grip. The bolwback-operated bolt is of wrap-around type, and when in forward position, it sleeves around the barrel for most part of its lenght. Bolt rides on two guide rails and has significant clearance between its sides and receiver walls, allowing the mechanism to work when seriously fouled inside. Z-84 fires from the open bolt, and has feed system so deigned that it allows for reliable feeding not only of FMJ ammunition, but also Soft-Point and HollowPoint (JSP, JHP) ammunition, used in police operations to achieve better stopping power. Safety switch is located inside the triggerguard, behind the trigger, and locks the trigger when engaged. Separate fire mode selector is located at the left wall of the receiver and allows for single shots or full-auto fire. Z-84 has additional safety features, including "intercepting notches" on the bolt, that used to catch the bolt if charging handle slips from the hand during the chargng cycle. Also, it has special "inertia lock", that locks the bolt in forward position against hard blows, and is owerridden by the pull of the charging handle. The charging handle itself does not move when gun is fired. Two-position flip-up aperture rear sights are graduated for 100 and 200 meters distance. Folding metallic butt-stock flips up and forward when not in use.
According to some sources, Z-84 is very reliable and quite controllable in full-auto, even when fired off-hands.
Star Z-84 (Spain)
Star Z-84Z-84 submachine gun has been developed in mid-1980s by Star Bonifacio Echeverria SA company of Spain, as a compact, lightweight yet comfortable and powerful weapon. Unlike its predescessors, the Z-62 and Z-70B, Z-84 available only in 9mm Luger/Parabellum (some sources said that it can be orederd in 9mm Largo, however) and is adopted by some Spanish Army and police units, and also is sold for export.
Z-84 is built to modern standards, having stamped steel, two-piece receiver, with magazine housing built into the pistol grip. The bolwback-operated bolt is of wrap-around type, and when in forward position, it sleeves around the barrel for most part of its lenght. Bolt rides on two guide rails and has significant clearance between its sides and receiver walls, allowing the mechanism to work when seriously fouled inside. Z-84 fires from the open bolt, and has feed system so deigned that it allows for reliable feeding not only of FMJ ammunition, but also Soft-Point and HollowPoint (JSP, JHP) ammunition, used in police operations to achieve better stopping power. Safety switch is located inside the triggerguard, behind the trigger, and locks the trigger when engaged. Separate fire mode selector is located at the left wall of the receiver and allows for single shots or full-auto fire. Z-84 has additional safety features, including "intercepting notches" on the bolt, that used to catch the bolt if charging handle slips from the hand during the chargng cycle. Also, it has special "inertia lock", that locks the bolt in forward position against hard blows, and is owerridden by the pull of the charging handle. The charging handle itself does not move when gun is fired. Two-position flip-up aperture rear sights are graduated for 100 and 200 meters distance. Folding metallic butt-stock flips up and forward when not in use.
According to some sources, Z-84 is very reliable and quite controllable in full-auto, even when fired off-hands.
AEK-919 K "Kashtan" submachine gun (Russia)
AEK-919 K "Kashtan" submachine gunAEK-919 submachine gun was developed at the Kovrov Mechanical Plant in the mid-1990s for Russian Army and special law-enforcement forces. Initial design was based on Austrian Steyr MPi-69 submachine gun, and was not withouth a certain flaws. After initial testings design was improved - overall lenght was decreased, cross-bolt safety switch was replaced by the rotating fire selector/safety swithch; ergonomics also was improved. Resulting design was named AEK-919K "Kashtan" and probably is used in small numbers by different special forces of the Russian Army and Law Enforcement units.
AEK-919K is a simple blowback operated, selective fire submachine gun. It featured a "sleeved" bolt which, in forward position, encloses the rear part of the barrel. AEK-919K is fired from the open bolt, and fed from the two-column magazines that hold 20 or 30 rounds. Receiver is made from the stamped steel, pistol grip with triggerguard and a heatshield are made from the plastic. Cocking handle is located at the left side of the receiver and does not move when gun is fired. AEK-919K featured an "L"-shaped open rear sights marked for 50 and 100 meters distance, it also can be equipped with laser aiming device and "red dot" sight. Barrel of the AEK-919K featured polygonal rifling and threaded muzzle, so a silencer can be quickly installed if required. Retractable stock is made from the steel, with rubberised buttplate.
AEK-919K is a compact and handy firerarm, and the only drawback i found when holding that gun at one of the exhibitions is in the placement of the safety/selector switch. When gun is in the "safe" mode, it is almost impossible to switch the gun into "fire" mode withouth the weak (non-firing) hand or withouth rotating the gun in the palm. In all other respects AEK-919K is reported to be accurate, reliable and comfortable to fire, even from off-hands. A currently advertised along with AEK-919K "red dot" sight is a little bit cumbersome but it allows for much faster target aquisition; any other, more compaqct "red dot" sight also can be installed withouth getting into much (if any) trouble.
AEK-919 K "Kashtan" submachine gun (Russia)
AEK-919 K "Kashtan" submachine gunAEK-919 submachine gun was developed at the Kovrov Mechanical Plant in the mid-1990s for Russian Army and special law-enforcement forces. Initial design was based on Austrian Steyr MPi-69 submachine gun, and was not withouth a certain flaws. After initial testings design was improved - overall lenght was decreased, cross-bolt safety switch was replaced by the rotating fire selector/safety swithch; ergonomics also was improved. Resulting design was named AEK-919K "Kashtan" and probably is used in small numbers by different special forces of the Russian Army and Law Enforcement units.
AEK-919K is a simple blowback operated, selective fire submachine gun. It featured a "sleeved" bolt which, in forward position, encloses the rear part of the barrel. AEK-919K is fired from the open bolt, and fed from the two-column magazines that hold 20 or 30 rounds. Receiver is made from the stamped steel, pistol grip with triggerguard and a heatshield are made from the plastic. Cocking handle is located at the left side of the receiver and does not move when gun is fired. AEK-919K featured an "L"-shaped open rear sights marked for 50 and 100 meters distance, it also can be equipped with laser aiming device and "red dot" sight. Barrel of the AEK-919K featured polygonal rifling and threaded muzzle, so a silencer can be quickly installed if required. Retractable stock is made from the steel, with rubberised buttplate.
AEK-919K is a compact and handy firerarm, and the only drawback i found when holding that gun at one of the exhibitions is in the placement of the safety/selector switch. When gun is in the "safe" mode, it is almost impossible to switch the gun into "fire" mode withouth the weak (non-firing) hand or withouth rotating the gun in the palm. In all other respects AEK-919K is reported to be accurate, reliable and comfortable to fire, even from off-hands. A currently advertised along with AEK-919K "red dot" sight is a little bit cumbersome but it allows for much faster target aquisition; any other, more compaqct "red dot" sight also can be installed withouth getting into much (if any) trouble.
Jati-Matic submachine gun / GG-95 PDW (Finland)
Jati-Matic submachine gun / GG-95 PDWJati-Matic submachine gun was designed by Jali Timari and manufactured at Tampeeren Asepaja Oy, Finland, in 1980 - 1987. In 1995 the Jati-Matic briefly appeared again, under the name of GG-95 PDW from finnish company Oy Golden Gun Ltd.
Jati-Matic is a blowback operated, select-fire submachine gun. The bolt recoils up an inclined plane at angle to the barrel, giving an element of braking to the bolt, and also resisting the upward movement of the barrel during the fire. The pistol grip is located higher than on many other SMGs, giving the better control over the recoil. Jati-Matic has no buttstock and has folding forward grip, which also acts as a cocking handle when opened. When folded, front grip also provides an element of mechanical safety, blocking the bolt. The receiver is made from pressed steel with hinged top cover. The selection of the fire mode (single or full auto) can be done with different trigger pulls - short pull produced single shots, long pull - full auto fire.
Jati-Matic submachine gun / GG-95 PDW (Finland)
Jati-Matic submachine gun / GG-95 PDWJati-Matic submachine gun was designed by Jali Timari and manufactured at Tampeeren Asepaja Oy, Finland, in 1980 - 1987. In 1995 the Jati-Matic briefly appeared again, under the name of GG-95 PDW from finnish company Oy Golden Gun Ltd.
Jati-Matic is a blowback operated, select-fire submachine gun. The bolt recoils up an inclined plane at angle to the barrel, giving an element of braking to the bolt, and also resisting the upward movement of the barrel during the fire. The pistol grip is located higher than on many other SMGs, giving the better control over the recoil. Jati-Matic has no buttstock and has folding forward grip, which also acts as a cocking handle when opened. When folded, front grip also provides an element of mechanical safety, blocking the bolt. The receiver is made from pressed steel with hinged top cover. The selection of the fire mode (single or full auto) can be done with different trigger pulls - short pull produced single shots, long pull - full auto fire.
Port-Said submachine gun
Port-Said submachine gun
Port-Said submachine gunIn early 1950s Egyptean government acquired necessary machinery and manufacturing documentation from Sweden to produce a local copy of the Swedish Carl Gustaf M/45 submachine gun. Originally known as “Port-Said”, the Swedish design was later simplified in Egyptian production by discarding barrel jacket and simplifying the sights and shoulder stock. This less expensive and somewhat more roughly finished version was produced as “Akaba” or “Kara” submachine gun.
Port-Said submachine gun is a simple blowback operated, full automatic only firearm that fires from open bolt. The receiver is made from steel tube, the separate barrel jacket is also made from perforated steel tube. Despite the fact that Egyptean submachine guns used only one type of magazine, the 36-round double stack, double feed box magazines designed for Swedish M/45 submachine guns, they retained removable magazine housings of earliest Swedish submachine guns, which were intended to allow use of various types of magazines. The manual safety is made in the form of an L-shaped cut made at the rear of the cocking handle slot; it is used to engage cocking handle when bolt is in retracted position. The sights consist of front blade and flip-type rear sight, marked for 100 and 200 meters. Shoulder stock is made from thin steel tubing and folds forward and to the right.
Port-Said submachine gun
Port-Said submachine gunPort-Said submachine gunIn early 1950s Egyptean government acquired necessary machinery and manufacturing documentation from Sweden to produce a local copy of the Swedish Carl Gustaf M/45 submachine gun. Originally known as “Port-Said”, the Swedish design was later simplified in Egyptian production by discarding barrel jacket and simplifying the sights and shoulder stock. This less expensive and somewhat more roughly finished version was produced as “Akaba” or “Kara” submachine gun.
Port-Said submachine gun is a simple blowback operated, full automatic only firearm that fires from open bolt. The receiver is made from steel tube, the separate barrel jacket is also made from perforated steel tube. Despite the fact that Egyptean submachine guns used only one type of magazine, the 36-round double stack, double feed box magazines designed for Swedish M/45 submachine guns, they retained removable magazine housings of earliest Swedish submachine guns, which were intended to allow use of various types of magazines. The manual safety is made in the form of an L-shaped cut made at the rear of the cocking handle slot; it is used to engage cocking handle when bolt is in retracted position. The sights consist of front blade and flip-type rear sight, marked for 100 and 200 meters. Shoulder stock is made from thin steel tubing and folds forward and to the right.
FAMAE S.A.F. (Chile)
FAMAE S.A.F.
FAMAE S.A.F.
FAMAE S.A.F.The S.A.F. SMG was developed and is manufactured by Chilean company FAMAE. The S.A.F. design is based on SIG 540 assault rifle, designed in Swiss and manufactured in Chile by FAMAE under license from SIG.
The S.A.F. SMG is in service with Chilean Armed Forces and Police.
Technically, the S.A.F. is a recoil operated select fire gun, firing from closed bolt. The triger/hammer group and floating firing pin design is similar to SIG 540, but the bolt is of new design. The receiver is similar in design to SIG 540, and is of folding type (upper and lower receivers are assembled by two steel pins, much like the M16 receiver does). The S.A.F. has ambidextrous safety/fire selector switch with four settings - safe, single shot, 3 round bursts and full auto. S.A.F. SMGs are manufactured with side-folding or fixed polymer buttstocks. Silenced version, with folding buttstock and integral silencer is available for special forces use. S.A.F. has post front sight, ajustable wor elevation, and aperture rear sight, ajustable for windage. S.A.F. uses 20 or 30 rounds magazines made from transluscent polymer. Magazines had special studs and slots that allowed two or more magazines to be clipped together for quicker magazine change.
FAMAE S.A.F. (Chile)
FAMAE S.A.F.FAMAE S.A.F.FAMAE S.A.F.The S.A.F. SMG was developed and is manufactured by Chilean company FAMAE. The S.A.F. design is based on SIG 540 assault rifle, designed in Swiss and manufactured in Chile by FAMAE under license from SIG.
The S.A.F. SMG is in service with Chilean Armed Forces and Police.
Technically, the S.A.F. is a recoil operated select fire gun, firing from closed bolt. The triger/hammer group and floating firing pin design is similar to SIG 540, but the bolt is of new design. The receiver is similar in design to SIG 540, and is of folding type (upper and lower receivers are assembled by two steel pins, much like the M16 receiver does). The S.A.F. has ambidextrous safety/fire selector switch with four settings - safe, single shot, 3 round bursts and full auto. S.A.F. SMGs are manufactured with side-folding or fixed polymer buttstocks. Silenced version, with folding buttstock and integral silencer is available for special forces use. S.A.F. has post front sight, ajustable wor elevation, and aperture rear sight, ajustable for windage. S.A.F. uses 20 or 30 rounds magazines made from transluscent polymer. Magazines had special studs and slots that allowed two or more magazines to be clipped together for quicker magazine change.
Monday, November 1, 2010
Amazing Gun
Hiram Maxim (born 1853) invented the Maxim Silencer or Suppressor: that attached to the front of the barrel of a pistol and allowed the firearm to be fired without a loud bang. Invented in 1909, the Maxim Suppressor was the first commercially successful silencer.
Amazing Gun
Hiram Maxim (born 1853) invented the Maxim Silencer or Suppressor: that attached to the front of the barrel of a pistol and allowed the firearm to be fired without a loud bang. Invented in 1909, the Maxim Suppressor was the first commercially successful silencer.
Subscribe to:
Posts (Atom)
